GitHub
audio-quality-checker
Analyze the WaveCap-SDR audio stream to assess tuning quality, detect silence, noise, proper audio, or distortion. Use when checking if SDR channels are properly configured or debugging audio issues.
☆ 1查看技能
TobiasWooldridge AI Skills
GitHub ↗浏览 TobiasWooldridge 维护的已发布 AI 技能，比较用途与说明，并通过来源仓库了解安装方式。
作者统计
已收录技能
35收录技能的仓库 Stars 合计
17仓库 Forks
0平均每个技能的仓库 Stars
0同一仓库中的多个技能可能共享 Stars，合计包含重复仓库数据。
热门分类
近期收录动态
全部技能
GitHub
signal-monitor
Get real-time signal quality metrics (RSSI, SNR, S-meter) from WaveCap-SDR channels. Use when checking signal strength, monitoring reception quality, or debugging weak signals.
☆ 1查看技能
GitHub
sdrplay-service-fix
Fix stuck SDRplay API service that causes device enumeration to hang. Use when SoapySDRUtil --find hangs, SDRplay device times out, or the SDRplay RSP is unresponsive.
☆ 1查看技能
GitHub
spectrum-analyzer-debug
Debug spectrum analyzer and waterfall display issues in WaveCap-SDR. Use when spectrum is not updating, shows incorrect frequencies, has poor resolution, excessive noise floor, or performance problems with FFT...
☆ 1查看技能
GitHub
config-validator
Validate wavecapsdr.yaml configuration files for syntax errors, schema violations, and logical inconsistencies. Use when editing config, troubleshooting startup failures, or verifying recipe/preset definitions...
☆ 1查看技能
GitHub
channel-optimizer
Auto-tune channel parameters to find optimal offset, squelch, and AGC settings for best audio quality. Use when setting up new channels, improving weak signals, or finding the sweet spot for demodulation settin...
☆ 1查看技能
GitHub
recipe-builder
Create and manage WaveCap-SDR recipe templates for common capture scenarios. Use when setting up new band plans, creating presets for trunking systems, or building reusable multi-channel configurations for mari...
☆ 1查看技能
GitHub
capture-health-check
End-to-end health check for WaveCap-SDR captures. Use when captures are stuck in "starting" state, spectrum analyzer not updating, audio not playing, or to verify the system is working correctly.
☆ 1查看技能
GitHub
device-prober
Probe and test SDR hardware capabilities (RTL-SDR, SDRplay, HackRF, etc.). Use when verifying device detection, discovering supported sample rates and gains, testing antenna ports, or troubleshooting SDR hardwa...
☆ 1查看技能
GitHub
log-viewer
View and analyze WaveCap-SDR server logs, debug output, and error messages. Use when troubleshooting server issues, debugging API errors, monitoring SDR device status, or investigating capture/channel problems.
☆ 1查看技能
GitHub
radio-tuner
Adjust SDR radio settings (frequency, gain, squelch, bandwidth, filters, AGC) in WaveCap-SDR. Use when changing tuning parameters, optimizing reception, or configuring channels.
☆ 1查看技能
GitHub
wavecap-controller
Control WaveCap-SDR server via MCP tools. Use when the user wants to tune frequencies, start/stop captures, manage channels, or control P25 trunking systems.
☆ 1查看技能
GitHub
dsp-filter-designer
Design and test DSP filters (highpass, lowpass, bandpass, notch) for WaveCap-SDR. Use when adding filters to demodulation pipeline, debugging filter response, or tuning cutoff frequencies and rolloff characteri...
☆ 1查看技能
GitHub
frequency-lookup
Look up frequency allocations, band plans, and known stations for radio services (marine, aviation, amateur, broadcast, NOAA weather). Use when finding frequencies to monitor, verifying band allocations, or dis...
☆ 1查看技能
GitHub
stream-validator
Validate WebSocket and HTTP stream health for WaveCap-SDR channels. Use when debugging streaming issues, measuring latency or throughput, detecting packet loss, or verifying audio/spectrum delivery.
☆ 1查看技能
GitHub
agc-tuner
Analyze and optimize AGC (Automatic Gain Control) parameters for WaveCap-SDR channels. Use when audio is too quiet, too loud, has pumping artifacts, or when tuning AGC attack/release/target settings for FM/AM/S...
☆ 1查看技能
GitHub
harness-runner
Run WaveCap-SDR test harness with automated parameter sweeps and validation. Use when regression testing, validating audio quality across configurations, testing SDR hardware, or benchmarking demodulation perfo...
☆ 1查看技能
GitHub
wavecap-events
Debug and trace WaveCap system events. Use when the user wants to investigate duplicate events, trace event sources, debug recording start/stop issues, or understand event flow.
☆ 0查看技能
GitHub
wavecap-hallucination
Configure WaveCap hallucination detection and prevention. Use when Whisper outputs gibberish, repeated phrases, or phantom text on silent audio.
☆ 0查看技能
GitHub
wavecap-service
Manage WaveCap as a macOS service. Use when the user wants to start, stop, restart the service, check service status, view service logs, or manage the launchd configuration.
☆ 0查看技能
GitHub
wavecap-transcripts
Check and analyze WaveCap transcriptions. Use when the user wants to inspect transcript quality, find problematic transcriptions, compare original vs corrected text, or audit transcription accuracy.
☆ 0查看技能
GitHub
wavecap-filters
Tune WaveCap audio filters and AGC settings. Use when the user wants to adjust highpass/lowpass filters, automatic gain control, de-emphasis, or improve audio quality for transcription.
☆ 0查看技能
GitHub
wavecap-llm
Configure WaveCap LLM-based transcription correction. Use when the user wants to enable/disable LLM correction, change models, tune prompts, or optimize correction quality on Apple Silicon.
☆ 0查看技能
GitHub
wavecap-evaluate
Evaluate WaveCap audio analysis and transcription accuracy. Use when the user wants to run regression tests, compare transcriptions against ground truth, calculate WER/CER metrics, or assess overall system qual...
☆ 0查看技能
默认按已收录数据中的 GitHub 仓库 Stars 排序。Stars 属于来源仓库，同一仓库的多个技能可能共享相同数值；它反映仓库关注度，不代表单个技能的安装量或质量评分。